- Think about your final construct. Choose the vector you want to modify and envision your final, mutated construct (Figure 1; mutation shown in yellow).
- Design your primers. Design inverse primers that overlap each other by 15 bp at their 5' ends and incorporate your desired deletion, substitution, or addition. Specific guidelines for mutagenesis primer design are described below.
- Utilize the power of In-Fusion technology. Using an inverse PCR protocol, amplify the vector with your new primers. Perform the In-Fusion Cloning reaction using the PCR product. The linear DNA will re-circularize at the site of the 15-bp overlap and will also contain your mutagenic changes. Use a portion of the In-Fusion Cloning reaction to transform the Stellar Competent Cells according to the In-Fusion HD Cloning Plus protocol.
- Obtain your final construct. Recover your mutant from the Stellar cells the following day.
- In-Fusion Cloning overview
- In-Fusion Cloning tools
- In-Fusion Cloning guide
- In‑Fusion Cloning FAQs
- In‑Fusion Cloning tips
- Choosing a seamless cloning method
In-Fusion Cloning tech notes
- In-Fusion Cloning applications collection
- Efficient multiple-fragment cloning
- Mutagenesis with In-Fusion Cloning
- Simplified insertion of a GFP-encoding cassette into a 100-kb plasmid
- In-Fusion Cloning of sgRNAs
- Sequence accuracy in seamless cloning
- De novo insertion of small fusion protein tags
- Improving background over Gibson Assembly
- Rapid, high-throughput cloning for antibody development
- A successful alternative to ligation cloning
- Single- and multiple-insert cloning
- Direct cloning into large vectors
- Easy cloning into lentiviral vectors
- Outperforming TOPO cloning
- Solve a synthesis challenge with easy multiple-insert cloning
- Efficient cloning for sgRNA/Cas9 plasmids
- In-Fusion Cloning citations
- EcoDry reagents and sustainability
- Sign up to stay updated
- Traditional molecular cloning
Mutagenesis with In-Fusion HD Cloning Plus
- A single system for deletions, base substitutions, or additions
- Flexible enough to use with any vector
- Over 95% accuracy
Featured product: ♦ In‑Fusion HD Cloning Plus kits (for mutagenesis)
In-Fusion Cloning makes it easy to perform mutagenesis: it combines the power of the In-Fusion HD enzyme with inverse PCR, a method for rapid in vitro amplification of the DNA sequences that flank a region of known sequence (Ochman et al. 1988). During inverse PCR, primers are oriented in opposite directions on your circular cloning vector (Figure 1). To perform mutagenesis with In-Fusion systems, design your PCR primers so that they have a 15-bp overlap with each other at their 5' ends and incorporate the mutation of interest. Use CloneAmp HiFi PCR Premix (a high-fidelity PCR polymerase included with all In-Fusion HD Cloning Plus systems) to perform your PCR reaction, add In-Fusion HD enzyme premix to your linearized PCR product, and transform the provided Stellar Competent Cells with the cloning reaction. You have a ≥95% chance of recovering your final desired construct—the first time and every time.
Primer design is a key component of simple deletion mutagenesis using In-Fusion technology. To delete a region of your cloning vector, you must design primers that include 15-bp overlaps with each other at their 5' ends and do not include the bases to be deleted (Figure 2).
For easy understanding of the primer design concept, different regions of the vector backbone and primers are marked in color in the figure below. The deletion site is marked in yellow and the binding site for the reverse primer (pink and turquoise) spans the deletion. The binding site for the forward primer (turquoise and black) is located against the cloning vector backbone. The two primers overlap by 15 bp at their 5' ends (the common area in turquoise). Note that there is no gap between the pink and turquoise regions in the actual primer sequence—the deleted nucleotides are not included in either of the primers.
To create a series of C-terminal deletions, design only one forward primer that anneals to your cloning vector immediately downstream of the coding region, retaining the stop codon. Then design a series of reverse primers that include 15 bp of overlap with the forward primer at their 5' ends and span different regions to be deleted. In Figure 3, Construct A has the blue region deleted, Construct B has the blue and turquoise regions deleted, and Construct C has the blue, turquoise, and pink regions deleted.
To create a series of N-terminal deletions, design one reverse primer that anneals to your cloning vector immediately upstream of the coding region, including a start codon. Then design a series of forward primers that retain the natural start codon, include 15 bp of overlap with a reverse primer at their 5' ends, anneal to the coding region you wish to maintain at their 3' ends, and span different deletions. In Figure 4, Construct D has the turquoise region deleted and Construct E has the turquoise and blue regions deleted.
Insertions or substitutions
To insert bases with In-Fusion Cloning technology, simply design primers that include 15-bp overlaps with each other at their 5' ends and contain the desired insertion(s) within the overlapping region (Figure 5). Only the 15 bases at the 5' ends of the primers are required to overlap, but depending on the length and sequence of your insertion, the overlap may be longer than 15 bp. Additional bases added to the primer will be maintained after the In-Fusion Cloning reaction.
Similarly, if you would like to change one or more bases in a construct, design primers that include 15-bp overlaps with each other and contain the desired substitutions within the overlapping region (Figure 5).
Please see the In-Fusion HD Cloning Plus user manual for detailed instructions.
- Select your vector and identify the mutation site.
- Design PCR primers as described above, keeping in mind these general guidelines:
- Primers should be 18–25 bases long. Insertions may require longer primers.
- Primers should be 40–60% GC.
- Primer Tms should be 58–65°C. The difference between forward and reverse primer Tms should be ≤4°C.
- Prepare CloneAmp HiFi PCR Master Mix:
CloneAmp HiFi PCR Premix 12.5 μl Forward primer 200–300 nM Reverse primer 200–300 nM Template 0.1–5.0 ng H2O As needed Total reaction volume 25 μl
- Linearize the vector by inverse PCR using a three-step PCR protocol and CloneAmp HiFi PCR Premix.
98°C 10 sec 55°C 5 or 15 sec 30–35 cycles 72°C 5 sec/kb
- Treat the PCR product with Cloning Enhancer to remove the circular double-stranded template from the reaction. If your PCR product contains multiple bands, gel-purify instead using the NucleoSpin Gel and PCR Clean-Up kit.
- Assemble the In-Fusion Cloning reaction:
Linear construct containing your mutation 100 ng In-Fusion HD Enzyme Premix 2 μl H2O As needed Total reaction volume 10 μl
- Incubate the reaction at 50°C for 15 min.
- Transform Stellar Competent Cells with 2.5 μl of the In-Fusion Cloning reaction.
- The next day, screen for mutants. You have a ≥95% chance of recovering your final desired construct the very first time.
User-generated protocols are based on internal proof-of-concept experiments, customer collaborations, and published literature. In some cases, relevant results are discussed in our research news BioView blog articles. While we expect these protocols to be successful in your hands, they may not be fully reviewed or optimized. We encourage you to contact us or refer to the published literature for more information about these user-generated and -reported protocols.
If you are looking for a product-specific, fully optimized User Manual or Protocol-At-A-Glance, please visit the product's product page, open the item's product details row in the price table, and click Documents. More detailed instructions for locating documents are available on our website FAQs page.
Questions? Protocols of your own that you would like to share?Contact technical support Give feedback
Takara Bio USA, Inc.
United States/Canada: +1.800.662.2566 • Asia Pacific: +1.650.919.7300 • Europe: +33.(0)1.3904.6880 • Japan: +81.(0)77.565.6999
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES. © 2020 Takara Bio Inc. All Rights Reserved. All trademarks are the property of Takara Bio Inc. or its affiliate(s) in the U.S. and/or other countries or their respective owners. Certain trademarks may not be registered in all jurisdictions. Additional product, intellectual property, and restricted use information is available at takarabio.com.